Screenshots

From BakaBT Wiki
Jump to: navigation, search

This article is aimed at providing useful information regarding adding screenshots to your description and the software used.

Adding screenshots to your description is necessary, as it's meant to preview the video and subtitle quality for the torrent. For that reason when taking screenshots they must be in source resolution, PNG (lossless) format, unless the video is anamorphic in which case they need to be in display resolution.

Contents

r10 - 2013-08-23

Taking Screenshots

  1. Recommended: AvsPmod (& AviSynth, Dither)
    Most flexible solution, but requires a few steps to set up.
    • + using Firesledge's script provided in this thread pretty much guarantees the screenshots to be the most faithful representation of the source
    • + high quality scaling for comparing releases with different frame dimensions
    • + AvsPmod provides efficient and convenient ways to compare multiple releases and batch export screenshots
    • - rendering subtitles requires them to be demuxed from the release
  2. Good: MPC-HC + madVr
    Easy to set up solution that doubles as THE high quality video playback solution on Windows, but not as convenient as method #1
    • + video quality on par with the AviSynth method
    • + easy to set up (install CCCP) and use (like a media player), doesn't require any demuxing or indexing
    • - does not supporting scaled screenshots for comparing releases with different frame dimensions
    • - not as well suited (or intended) as AvsPmod for more extensive comparisons, comparing releases side-by-side possible but cumbersome
  3. Good: mpv (-vo opengl-hq; use at least version 0.1.0)
    Cross-platform solution also available on Mac OS X and Linux, not as convenient as method #1
    • + easy to set up and use if you're familiar with the command line
    • + access to advanced configuration options and quite powerful video filters for a video player
    • - video quality very slightly inferior to methods #1 and #2
    • - not as well suited (or intended) as AvsPmod for more extensive comparisons, comparing releases side-by-side possible but cumbersome
  4. Avoid: MPC-HC + EVR CP
    Default setup when installing CCCP or MPC-HC/BE.
    •  ! not a fault of EVR in and by itself, but an all too common error source: uses video "enhancement" features of your video card driver which actually destroys the video (and your screenshots) in several ways, including but not limited to:
      • fucking up colors,
      • adding ugly sharpening,
      • creating sugoi banding, and
      • other artifacts.
    If you absolutely have to use the EVR renderer for taking screenshots, make sure all video enhancement options of your graphics card driver are turned off
    • - possible pixel shift to the left (tested on recent NVidia drivers)
    • - slightly inferior video quality compared to madVr (defaults to bilinear chroma upscaling, random dithering using lav video decoder)
  5. Do not EVER use: VLC
    Atrocious video player with terrible video quality
    • - uses wrong matrix for RGB conversion (results in wrong colors)
    • - uses point upscaling for chroma planes
    • - introduces strong banding
    • - all the other bugs (including some that haven't been fixed in years) make it equally unsuitable media player. Seriously, stop using VLC!
  6. Do not use until further notice: FFmpeg
    Versatile command line video/audio processing tool unsuitable for taking screenshots
    • - incorrectly uses BT.601 matrix for all content (results in wrong colors)
    • - colormatrix filter causes strong banding
    • - uses point upscaling for chroma planes and ordered dithering (low video quality)
    • - not practical doing screenshot comparisons (as a standalone tool), doesn't seem to be able to take frame numbers as seek points

AvsPmod

Required Components

Basic requirements

Software Version
AviSynth 2.6a4 Download
AvsPmod 2.5.1 (+upd. library) Download
FFMS2 r743 (10bithack) Download
FFMS2 (H265 compatible)  ? Download
Dither Avisynth Tools 1.23.0 Download
Masktools 2.0a48 for 2.6a4 (06_taro) Download
xy-vsfilter 3.0.0.232 (cccp) Download
FFInfoEx r1 Download

This tutorial also assumes you're running a fully updated Windows 7/8 machine with all recent VC++ distributables, .net Frameworks and whatnot. The H265 compatible version should work as well as the old version, however if you have problems and don't need to compare H265 then use the old one. Things probably also work on Vista/XP and you might even get them to run with Wine on Linux, but you're on your own.

Additional requirements for the subtitle extraction script

Software Version
Windows Powershell 3.0 Download (x86) / Download (x64)

Installed by default on Win 8, Win 7 SP1 users need to upgrade.
No XP/Vista support.

Microsoft .NET Framework 4.5 Download (Prerequisite for Powershell 3)
MKVToolNix 6.3.0 Download
SIL FontUtils 1.00 Download
ExRelease 0.9.5 Download

Setting thing up the environment

  1. Install AviSynth
  2. Open your AviSynth plugins directory in Explorer
    Unless you changed the the AviSynth install location, your plugins directory should be
    (enter these into your explorer location bar):
    • [On 64-bit Windows] %ProgramFiles(x86)%\AviSynth 2.5\plugins
    • [On 32-bit Windows] %ProgramFiles%\AviSynth 2.5\plugins
    There should be only 3 files inside the directory: colors_rgb.avsi, DirectShowSource.dll, TCPDeliver.dll
  3. Open the Dither Avisynth Tools archive (dither-1.22.1.zip) and unpack the following files to your AviSynth plugin directory:
    • avstp.dll
    • dither.avsi
    • dither.dll
    • mt_xxpand_multi.avsi
    The docs folder inside the archive contains detailed documentation on the dither tools, so you might want to extract this to your AviSynth Docs directory or anywhere else you'll find it in case you need it later
  4. Open the downloaded ffms2 archive and extract the contents into your Avisynth plugin directory
    • ffms2.dll
    • ffmsindex.exe
  5. Open the downloaded masktools archive and extract mt_masktools-26.dll to your AviSynth plugin directory
  6. Open the downloaded AvsPmod archive and extract the AvsPmod folder to:
    • On 64-bit Windows: %ProgramFiles(x86)%
    • On 32-bit Windows: %ProgramFiles%
    Create a shortcut to avspmod.exe, or pin it to the taskbar/start menu
  7. Copy the downloaded VSFilter.dll and FFInfoEx.avsi to your Avisynth plugin directory

Getting started with screenshot comparisons

  1. Start AvsPmod and open the settings dialog (Options > Program settings)
    1. On the User Sliders tab check Hide slider window by default (The slider window usually only gets in the way)
    2. If you are using more than one screen, it's usually wise to check the Seperate preview window option, so you can have one screen dedicated to the video and one to the script
    3. On the Misc tab, uncheck the Show warning for bad plugin naming at startup option
  2. Go to Options > Snippets and click on Insert. Insert the following script template as snippet and give it a tag you will remember
    (Script by Firesledge with a few additions)
  3.  Dither_limit_dif16(DitherPost(mode=-1).TextSub(subfile).Dither_convert_8_to_16 (), thr=1.0, elast=2.0) : TextSub(subfile)
    \: nop()
    (VersionNumber () >= 2.6) ? c2 : c1
    (StrLen(subfile) > 0 && display_subtitles)  ? 
    \ (b10) ? group + "\nupscaled" : group
    FFInfoEx(vfrtime=display_timecode, cfrtime=false, frametype=false, x=last.width-6, y=4, cmt=cmt, align=9, shorttime=true)
    

    Float (c1_FFSAR_NUM) / Float (c1_FFSAR_DEN) \  : Dither_undef () tv_range = (c1_FFCOLOR_RANGE != 2) (b10) ? vidfile="VIDEOFILE" subfile="" c1 = FFVideoSource (vidfile, enable10bithack=false) c2 = FFVideoSource (vidfile, enable10bithack=true, varprefix="c1_") w = c1.Width () h = c1.Height () wm4 = (w + 3) / 4 * 4 hm4 = (h + 3) / 4 * 4 b10 = (c2.Height () > c1.Height ()) target_width = w target_height = h display_timecode = false display_subtitles = true group = "GROUPNAME" matrix = (c1_FFCOLOR_SPACE == 1) ? "709" \  : (c1_FFCOLOR_SPACE >= 5) ? "601" : Dither_undef () par = (c1_FFSAR_NUM > 0 && c1_FFSAR_DEN > 0) \  ? Dither_addborders16 (0, 0, wm4 - w, hm4 - h) \  : AddBorders (0, 0, wm4 - w, hm4 - h) (target_width != c1.Width() || target_height != c1.Height()) ? Dither_srgb_display (lsb_in=b10, matrix=matrix, par=par, tv_range=tv_range, w=target_width, h=target_height) \ : Dither_srgb_display (lsb_in=b10, matrix=matrix, par=par, tv_range=tv_range) cmt = (target_width > c1.Width() || target_height > c1.Height()) ? last \ : (b10) ?

  4. Now that you're all set, let's load the videos to compare.
    1. Click into the empty script window and hit F7 to get a list of your snippets. Since there's only the one snipped you just created, hit TAB to insert it
    2. Replace VIDEOFILE in the first line with the full path to an episode (e.g. Z:\ScreenCompare\ZSZS\[gg]_Zan_Sayonara_Zetsu bou_sensei_-_02_[DB36C966].mkv) of the first release you want to compare and GROUPNAME in the last line with the appropriate group tag
    3. Hit F5 to load (or refresh) the video. Loading a file for the first time might take a few seconds, since the file is being indexed first.
    4. Save the script
    5. Hit Ctrl+N or double click next to the current tab to open a new script tab
    6. Repeat from Step 3a
  5. Syncing up the releases (easymode)
    1. Check if the video of all releases matches up, by going through them with Alt+1, Alt+2, Alt+3, ...
      The best way to do is is to seek to the last frame before a scene change, check if it matches up across tabs, then seek to the next frame and check again
      (Seek by using the arrow keys (left/right: 1 frame; up/down: 1 second) or clicking the timeline for larger time distances)

      Note: You may find out that not all subsequent frames match up or worse, the releases running out of sync over time. If it's only single frames, just avoid using them for screenshots. In case of releases running out of sync, you're dealing with either missing sections or different frame rates. Refer to the [Advanced Tutorial TBD] on how to deal with those cases.
    2. Once all releases you want to compare are in sync, right click their tabs and add them to a single group. Make sure the Apply offsets and Offset also bookmarks options are checked.
      AvsPmod will now remember the frame offsets between tabs and automatically seek to the right frames on a shared timeline.
    1. To reasonably compare screenshots, we need all frame sizes to be of the same resolution. You should have noticed any differences already while syncing up the releases.
      If all resolutions match, skip this step. If they don't, find out the highest resolution by looking at the bottom right of the status bar.
      The information will be in the following format: FrameWidth x FrameHeight (AspectRatio) - Framerate fps - Colorspace
    2. Take the largest width and height among the releases and find the following section in the scripts for all releases that need to be resized:
       Ideally you'd want matching frame types across the different releases.
      In practice checking this gets more of a waste of time with each additional release you have to compare. Just try to keep the number of B-to-I comparisons low and make sure you don't pick only B-Frames for one release and only P-Frames for the other.
      A very easy way to avoid this issue is to not pick frames by only looking at one release. You'll get a confirmation once the export is done.
    3. Repeat from step 7a for every open tab/release

Setting up the ExRelease extraction script

  1. Open Notepad or a text editor of your choice and type ;.
  2. Install MKVToolNix and copy the path to the destination folder into your notepad document.
    1. Append a ; to your notepad document. Copy its path to your notepad document and append another ";"
      Unless you changed the the AviSynth install location, your plugins directory should be
      (enter these into your explorer location bar to make them resolve to full paths):
      • [On 64-bit Windows] %ProgramFiles(x86)%\AviSynth 2.5\plugins
      • [On 32-bit Windows] %ProgramFiles%\AviSynth 2.5\plugins
      Make sure you append the full path to your notepad document, so it looks like this:
    2.   ;C:\Program Files (x86)\MKVToolNix;C:\Program Files (x86)\AviSynth 2.5\plugins;
      
    3. Unpack the ExRelease archive to
      • %userprofile%\Documents\WindowsPowerShell\Modules
    4. To make the tools you just installed available to the script and the script conveniently available from everywhere, we need to add their locations to your PATH environment variable
      1. Hit Win+Pause to open the System Control Panel
      2. Click on Advanced System Settings (on the left sidebar), which should open the System Properties Window
      3. Click on Environment Variables
      4. Browse the System variables until you find the Path variable. target_width = w target_height = h Replace w with the largest FrameWidth and h with the largest FrameHeight
      5. Hit F5 to refresh the video preview and confirm everything works as expected.
    5. Select frames for the screenshot comparison
      1. Find a frame suitable to convey significant information about an aspect of video quality.
        Pick:
        • one or two frames of a structure that represents what is on the screen most of the episode (to give a general idea about the video quality)
        • frames from dark scenes
        • high-detail frames / frames with fine structures
        • frames with low contrast
        • frames from high-motion scenes
        • a frame or two from a fade-in/fade-out
        • frames that display video artifacts in one ore more releases (refer to this thread on how to spot and identify video artifacts)
        • at least one frame from the OP and one frame from the ED
        Try to get as many B-Frames as possible. The contents should now look like this:
      2.   ;C:\Program Files (x86)\MKVToolNix;
        
    6. Install FontUtils and make sure the Add installation directory to PATH option is checked
    7. Remember your AviSynth plugin directory from the first tutorial? Highlight it and click on Edit...
    8. Click into the Variable value input field, and hit the End key to move the cursor behind the last entry (which should be your FontUtils path)
    9. Append the contents of your notepad document and hit Enter
    10. Click OK on the Environment Variables and System Properties to save the settings
  3. Run Windows PowerShell (you'll find it in the programs menu)
    1. Make sure you are running at least Powershell v3.0. If the number under Major says 3, you're good to go (continue with step 8)
    2. If it doesn't, install
      • [On 64-bit Windows] Windows6.1-KB2506143-x64.msu
      • [On 32-bit Windows] Windows6.1-KB2506143-x86.msu

      If the update fails with "The update is not applicable to your computer", you need to install the .NET Framework 4.5 (dotNetFx45_Full_setup.exe) first.
      You may need to restart your computer after installing Powershell 3.
      Open Windows PowerShell again and run This way your screenshots will (almost) always sort to comparison-friendly order by default. Make sure Add the frame number as suffix is checked when using %06d, otherwise it only counts up rather than inserting the current frame number.

      Example of Directory+Basename: Z:\ScreenCompare\Out\%06d_Zurako
      You may also want want to check the Use always this directory option since you need to run this macro for each release seperately.
    3. Click OK. Type $PSVersionTable.PSVersion into the command prompt and hit enter. This comes with the added benefit of you being more likely to spot video artifacts in ALL releases.
      (Check the overlay on the top right of the video frame to find the frame type of the current frame.)
    4. Once you've decided on a frame, hit Ctrl+B to bookmark it.
    5. Repeat from 6a for each additional frame
      If you want to check the frames you already bookmarked, hit F2/Shift+F2 to browse through your bookmarks
  4. Export screenshots
    1. Once you're done deciding on frames to screenshot (10-15 is a good number), it's time to export them to PNG.
      Go to Macros > Save image sequence (make sure Select frames is set to "Bookmarks" and Output format to "*.png")
    2. Pick an output directory and basename.
      I recommend using the basename format %06d_Groupname.

       $PSVersionTable.PSVersion
      to confirm you are now running version 3
  5. Next, we have to change the execution policy to allow running unsigned scripts. With this preparations to run the ExRelease script are done.

Using the ExRelease script to take screenshots with subtitles/typesetting

The ExRelease script automates a number of thigs you'd otherwise have to do by hand: To do this, run Set-ExecutionPolicy Bypass -Scope CurrentUser and confirm with Y.

  • Demuxes subtitles from .mkv files
  • Extracts attached fonts softsubbed releases (which are required to render the subtitles correctly)
  • Looks for typesetting inside extracted .ass subtiles and writes a text file, which can be imported as bookmarks in AvsPmod
  • Loads extracted fonts into memory to make them available to the subtitle renderer
  • Finds the highest resolution of the releases you want to compare
  • Writes an AviSynth script with all important parameters already set, so you can start taking screenshots right away


  1. Open PowerShell
  2. Move or copy all releases you want to compare with each other to a separate folder. The script works on whole directories, so every .mkv file in the folder is going to be processed.
  3. Run the script by typing
     ExRelease "X:\SomePath\To Love Ru Darkness"

    (Substitute for your comparison directory, of course.) You can use the Tab key to auto-complete directories or just type "ExRelease" and drag/drop the folder into PowerShell to insert its path.

    The script will now process your files and also create indexes, so it's time to go to the fridge and grab a beer.
  4. When the script is done it will ask you if you want it to load fonts now. Answer with Y for yes.
    Fonts remain loaded in memory for the duration of the session (that means until you log out or shut down the computer).
    1. In case you want to (continue) work on the screenshot comparison after a logout or reboot, run the script again with
       ExRelease "X:\SomePath\To Love Ru Darkness" -load
  5. Open the generated .avs scripts (which reside next to the .mkv files) in AvsPmod.
    If everything went right, all releases should display at the same resolution, subtitles should now be rendered on the frames, and the releases should now have the appropriate group tag next to the frame numbers.
  6. To save you the effort of finding typesetting to compare, ExRelease has already done that for you.
    1. To import the found typesetting locations as bookmarks, click on Macros > Import bookmarks from file and pick the .TSChapters.txt saved alongside the release you are comparing.
    2. Repeat this for every other release you are comparing. This is important because you not only want to compare the TS group A did, but also the TS group B did and group a didn't.
    3. Take note that the typesetting detection is very crude and timecodes are somewhat inaccurate, therefore the typesetting may appear a frame before/after the bookmark or e.g. only starts fading in at the bookmark locations. Therefore it's vital to go trough the bookmarks and move them around to get useful screenshots. To remove a bookmark, just press Ctrl+B at the bookmarked location (frame number in red)
  7. To unload fonts after you are done with your comparison, run the script with ExRelease "X:\SomePath\To Love Ru Darkness" -unload


Addendum: The script offers a number of advanced parameters that let you customize your workflow. Run

 Get-Help ExRelease -detailed

in PowerShell to display its internal help file.

MPC-HC + madVr

Display Ratio Safe? YES

Cons: Cannot take screens of video with a resolution higher than your desktop. (Can possibly be fixed if you can change your resolution temporally)

Extra Utilities: IrfanView (Eliminates need to manually crop images)

Open up IrfanView and type the 'C' key to open up the capture dialog (link)

  Change the settings to match the example image. You can of course use a hot-key combination of your choosing and the file name can be ignored as you should be renaming after each capture you take.
 

Press 'Start' and IrfanView should minimise

Open up your video in MPC and find a good scene

 Type the '1' key to change to MPC's minimal view (before, after)
  Make sure your video is displaying at its display resolution (Or at least change it back before the next step).
 Use general seeking tips. Ctrl+Right Arrow Key is MPC's default frame step key.
 (Backward stepping using the Left Arrow Key can sometimes do multiple frames)
 

Found that frame?

  (To revert back to the default view, type '3')
 This step eliminates the need to crop the screenshots to the correct size.
 If your desktop is the same resolution as your video, you WILL need to use full-screen mode (Ctrl+Enter)

Type the IrfanView hot-key you setup earlier (Alt+F in example image)

  Make sure the entire video is displayed on-screen, if you have positioned your window at the edge of your desktop and is cutting off, the capture will be cut off too.

Check the destination directory you told IrfanView to save your screenshots to[/size] (link)

  Your screenshot should be in that folder (Double check hot-key and destination if not).
 Rename the file now in order to prevent confusion later, '## group timestamp' is a good idea.

Repeat the process as necessary.

mpv

  • Don't take screenshots with the default keybindings, it degrades quality
  • Don't take screenshots with the opengl-hq profile alone. It activates debanding.
  • Deactivate debanding by setting --deband=no in mpv.conf
  • Set screenshot key to "KEY scnreenshot window" (e.g. "s screenshot window") in input.conf
  • Make sure to leave the window at the original size. Don't resize it.

To always take screenshots in 8bit:

Credit: der_richter

General seeking tips

Find a frame suitable to convey significant information about an aspect of video quality.

Pick:

  - one or two frames of a structure that represents what is on the screen most of the episode (to give a general idea about the video quality)
 - frames from dark scenes
 - high-detail frames / frames with fine structures
 - frames with low contrast
 - frames from high-motion scenes
 - a frame or two from a fade-in/fade-out
 - frames that display video artifacts in one ore more releases (refer to this thread on how to spot and identify video artifacts)
 - at least one frame from the OP and one frame from the ED

Hosting Images

You probably want to use our image server. If for some reason that doesn't suit you, take a look at these other options:

Site Registration Required Maximum Image Size Bandwidth Limit Comments
Min.us No 7 MB Unlimited
PhotoBucket Yes 5 MB 10 GB/month
SadPanda.us No  ? Unlimited Operated by the staff of Gelbooru.
TinyPic No  ?  ?

Image Hosts You Shouldn't Use

  • ImageShack - Resizes and degrades image quality after an unknown amount of time. Still useful to temporarily upload images to before transferring them to BakaSHOTS.
  • Imgur - According to their "Terms of Service" hotlinking to torrent sites is prohibited.

Adding Screenshots

Adding these tags will not do anything to your description, instead it will add screenshots just below your description using a lightbox viewer for easy viewing. If using HTML code, screenshot tags may be placed inside or outside the <html> tags, there is no difference in parsing either way.

 [screenshot]screenshot code goes here[/screenshot]
Inserts screenshot thumbnails below the description. Thumbnails are resized to 150 pixels in width by default.
[screenshot=200]screenshot code goes here[/screenshot]
Inserts screenshot thumbnails 200 pixels wide below the description. Change 200 to the pixel width of your screenshot thumbnails as necessary.

You can add more than one block of screenshots, possibly with different size thumbnails.

 [img]link to image[/img]
Will add one image. You can add as many as you like.
[url=link to image][img]link to thumbnail[/img][/url]
Allows you to explicitly define your own thumbnail images. If no thumbnail image is supplied it will use the linked image and resize it to whatever width is supplied for the thumbnail.

NOTE: Screenshots will not show up in the Sandbox; you have to go to the torrent description page in order to view them.

If thumbnail images are not used, the big images are loaded first, then resized to thumbnail-size on your screen. This makes image-loading really slow, and also make scrolling laggy, so as far as possible supply thumbnail images or use an image-host that auto-generates them.

BakaSHOTS Images

For details on how to insert images hosted on BakaSHOTS into descriptions, please see here: BBCode#BakaSHOTS.